add an Ekby Alex drawer set to your Ikea Jerker desktop

Designed as a standalone shelf, the Ekby Alex drawer unit can make a very, very useful addition to an Ikea Jerker (version 2) desk.

Ikea Ekby Alex (drawer unit)

Official Ikea Jerker drawers are pretty hard to come by, in part because they were an optional item, in part because they’re were not designed to be paired with for ⅔rds of the Jerker desk designs.

But, the Ekby Alex drawer shelf just so happens, and believe me I was very excited when I found out, to fit absolutely perfectly between the legs of an Ikea Jerker (version 2) desk. You could place one of these units on a top shelf, but the fact is, even if you use it where it is most hand, on the desktop, it still leaves you with lots of desk-space for keyboard, mouse, joystick, and similar peripherals.

The Alex Ekby comes in one long box. It’s actually manageable to carry out of the store, but is a bit heavy, weighing 12kg (27lbs). The build time is about a half-hour. In addition to the parts an pieces in the box you’ll also need a hammer (the back is assembled with about thirty little nails), a flathead screwdriver and a Phillips head screwdriver.

Here’s a video showing the whole build process:

As mentioned in the video, be sure to note the sizes of the connector pieces, in my build I didn’t at first distinguish between them and it took a bit of time to straighten my mess out.

Once together, I found the Alex Ekby to be a very sturdy little shelf drawer set.

One other point to bear in mind, the drawers only pull out slightly more than half way; but the insides of the two drawers have plenty of space: The horizontal space measures, front to back 24cm (9.5 inches) and 54cm (21.25 inches) from side to side. And the depth is a mere 5.75cm (2.5 inches). One drawer will fit one ream of printer paper and dozens of pens pencils, erasers, a couple of pairs of scissors and a stapler. But most tape guns, office sized tape dispensers, and three hole punchers will not fit in these drawers.

Here are photos of mine in use.

Ikea Alex Ekby on an Ikea Jerker (version 2)

Ikea Alex Ekby on an Ikea Jerker (version 2) drawer open

And, for those Jerker owners don’t have enough top shelves, or just want to be different, you can also use the Alex Ekby (or two?) as a monitor riser. The Alex Ekby is rated to support 22kg (44 lbs) and each would raise your monitor by 11.5cm (4.5 inches).

Here’s a scan of the end of the box:

Ikea Ekby Alex (Drawer Unit)

Ikea Jerker Drawer Unit

The Ikea Jerker drawer unit, designed to be used with the long desk, and the storage unit, is perhaps the rarest Ikea Jerker add-on made.

Ikea Jerker Drawer Unit Dimensions

Dimensions: 16.5″ x 15.75″ x 11.375″

Made of real wood and painted silver, it bolts into the bottoms of the either a steel storage rack, or a desk frame. It originally sold for about $50.

Here’s how it looks:

Ikea Jerker Drawer Unit mounted under a desk

Ikea Jerker Storage Unit with Drawers

I don’t have very much experience with the drawer unit, a friend’s mom has a set, but I’d like to get my hands on one, two, or maybe three sets.

If you have a set please let me how you like it. Do you use it? What do you keep in it? Would you redesign any element of it? Does it need handles?